Operations Guide
931281I
CyberData Corporation
2.3.4 Log in to the Home Page
1. Open your browser to the device IP address.
Note
If the network does not have access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Note
Make sure that the PC is on the same IP network as the InformaCast Enabled Loudspeaker
Amplifier (AC-Powered).
Note
You may also download CyberData’s VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products.
CyberData’s VoIP Discovery Utility program is available at the following website address:
https://www.cyberdata.net/pages/discovery
Note
The device ships in DHCP mode. To get to the
Home
page, use the discovery utility to scan
for the device on the network and open your browser from there.
2. When prompted, use the following default
Web Access Username
and
Web Access
Password
to access the
Home Page
(
):
Web Access Username:
admin
Web Access Password:
admin
Summary of Contents for InformaCast Enabled 011406
Page 80: ...Operations Guide 931281I CyberData Corporation Figure 2 41 SSL Configuration Page ...
Page 81: ...Operations Guide 931281I CyberData Corporation Figure 2 42 SSL Configuration Page ...
Page 90: ...Operations Guide 931281I CyberData Corporation Figure 2 47 Audiofiles Page ...
Page 91: ...Operations Guide 931281I CyberData Corporation Figure 2 48 Audiofiles Page ...