CyberData Corporation
3 Justin Court, Monterey, CA 93940
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 18
Figure 5-4:
SIP Tab
9.
Set the ‘SIP Transport Protocol’ to
TLS
.
10.
Keep TLS version set to “
1.2 Only (Recommended)
”.
11.
Check the box for “
Verify Server Certificate
”
12.
Set the
Primary SIP Server
to the SIP Domain from the configuration Popup.
13.
Set the
Primary SIP User ID
to the Username from the configuration Popup.
14.
Set the
Primary SIP Auth ID
to the Authorization ID from the configuration Popup.
15.
Set the
Primary SIP Auth Password
to the password provided in the configuration
Popup.
16.
Set the
Outbound proxy
and
Outbound Proxy port
to the address provided in the
configuration Popup.
Note: Make sure to separate the port from the outbound proxy information provided by zoom.
17.
Check the box for “
Force Selected Codec
”.
18.
Save.
19.
Go to the ‘
SSL
’ Tab.