CyberHome DVR 1200, Operation Manual

VIDEO

DVD R W

STAND BY

L      AUDIO     R

VIDEO IN 2

DVR 1200

DVD RECORDER WITH PROGRESSIVE SCAN PLAYBACK

RECORD

8

DISC TRAY

 - Loads DVD+R/RW, DVD, CD-ROM, 

ON / STANDBY

 - Turns the unit on and sends the 

VCD/SVCD, MP3, JPG and other optical discs.

unit to standby mode. In standby mode, the unit 
will use a minute amount of power to enable 

FRONT DISPLAY

 - The front Vacuum Flourescent 

power-on by the remote control. 

Display shows information about the unit's 
operation, such as current chapter and elapsed 

LEFT/RIGHT AUDIO IN 2

 - Front Stereo Audio 

time during playback. 

Inputs for recording. These inputs are shared with 
the VIDEO IN 2 input. 

OPEN/CLOSE

 - Press to open or close the disc 

tray.

COMPOSITE VIDEO IN 2

 - Front Composite 

Video Input for recording. To select, use the 

PLAY/PAUSE

 - Begins playback of a disc, chapter 

SOURCE key and select VIDEO IN 2. 

or track. Press again during playback to pause, 
and again to resume playback. 

RECORD

 - Begins a Live Recording.

7

8

3

4

5

1

2

6

Front Panel

Functions

5

6

8

1

2

3

4

7

POWER CORD SOCKET

 - Plug the matching end 

STEREO AUDIO INPUTS

 - Use with S-VIDEO 

of the power cord into the unit before connecting 

INPUT or VIDEO INPUT 1 for recording. 

the other end to the wall socket.

COAXIAL DIGITAL AUDIO OUTPUT

 - Use a 

ANTENNA IN / OUT

 - For Antenna or Cable TV 

special Coaxial Digital Cable to send the raw 

connection. This is 

Passthrough

 connection to TV, 

coded digital signal to devices supporting digital 

this means it does NOT transfer the output signal 

audio decoding. 

from the DVD Recorder to your TV (i.e., CH 3). 

S-VIDEO OUTPUT

 - Connect to TVs with S-

VIDEO INPUT 1

 - Composite Video input for 

VIDEO in for better picture quality than standard 

recording. To select this input, use the SOURCE 

composite video. 

button and choose VIDEO1.

COMPONENT / PROGRESSIVE SCAN VIDEO 

STEREO AUDIO OUTPUT

 - Connect to TVs or 

OUTPUT

 (Y Pb/Cr Pr/Cr)- Use this output with 

other audio equipment supporting Stereo Audio in. 

TVs supporting Component Video or Progressive 
Scan input for best video quality. Select the 

COMPOSITE VIDEO OUTPUT

 - Standard video 

PROGRESSIVE SCAN MODE in the Recorder's 

output supported by most TVs. 

SETUP MENU for P-SCAN TVs.  

S-VIDEO INPUT

 - S-VIDEO input for recording. To 

select this input, press SOURCE and choose S-
VIDEO.  

7

8

10

3

4

5

1

2

6

9

Back Panel

1

2

3

4

5

9

10

11

8

PLAY

PAUSE

Made in China

6

7