12
OPERATION
Operation of rear panel
1
AC IN 100-230V:
Mains socket for connecting to the mains supply (100-230V) with the
power cord. Plug the matching end of the power cord into the unit before
connecting the other end to the wall socket.
2
ANTENNA IN:
Aerial input for connecting to the aerial.
3
COAXIAL OUTPUT:
Digital coaxial audio output for connection to a digital audio device (ampli-
fier/receiver). Please note that the amplifier/receiver has to be compatible
to Dolby Digital, MPEG and/or PCM (for more information please refer to
the manual of your amplifier/receiver).
4
AUDIO R/L OUTPUT:
Analogue 2-channel audio outputs (white/red socket) for connection to a
television, AV receiver, beamer or stereo system.
5
VIDEO OUTPUT:
Composite video output (yellow socket) for connecting to a TV with a video
input (CVBS, composite video) by an audio/video cable.
6
REGION CODE:
Indicates that the device is set to DVD region code “2”.
7
ANTENNA OUT:
Aerial output for connecting to the TV.
8
EXT2 AUX:
SCART socket 2 for connecting additional devices, e.g. DVD player, video
recorder, camcorder, satellite receiver, set-top box. To select, use the
“SOURCE”
button and select
“Video 1”
or
“S-Video”
.
9
S-VIDEO OUTPUT:
S-Video output for connection to a TV with S-Video input by an S-Video
cable. The S-Video output can be used instead of the video output, result-
ing in a higher video quality than standard composite video.
a
EXT1 TO TV:
SCART socket 1 for connecting to the TV.
1
1
2
3
4
5
7
8
9
10
6
