PLAYBACK
34
Inserting a disc
1
Press the Open/Close button
“
K
”
on the front of the device or on the
remote control to open the tray. The display shows
“OPEN”.
2
Carefully place the disc in the tray with the label facing up. Be careful
not to touch the playing surface. Hold the disc by the sides and with
your fore finger through the hold in the middle and insert gently into the
tray.
3
Press the Open/Close button
“
K
”
on the front of the device or on the
remote control to close the tray. The display shows
“CLOSE”
and then
“LOAD”
. The information on the disc is read.
4
The inserted disc type is indicated on the screen. If the disc supports
the Auto Play function, playback will begin automatically.
Playing a DVD-Video disc
1
If playback does not start automatically, press the Play/Pause button
“
A/I
”
on the remote control or on the front of the DVD recorder. In the
display will appear the chapter and time elapsed.
2
To stop the disc, press the Stop button
“
J
”
on the remote control. On
the VFD display appears
“STOP”
.
3
To eject the disc, press the Open/Close button
“
K
”
on the remote con-
trol or on the front of the device.
How to insert a double-sided DVD?
Double-sided discs do not have labelling over the whole surface. The
labelling for each side is in the centre of the disc. To play a side its
label must be facing up.
CLOSE
Labeling side
Surface
OPE
LO
S OP
DVD menu:
When playing a DVD, a menu may appear. If the titles and chapters are
numbered, press a number button on the remote control. You can also use
the direction buttons
“
B
”, “
A
”, “
C
”
and
“
D
”
to select a menu item and
confirm with the button
“ENTER”
.
You can also access the menu using the button
“MENU”
on the remote
control.
