_____________________________________________________________________
BIOS Setup Cybernet iOne-Medical PC
Page 16
To set the date, highlight the “Date” field and use the PageUp/
PageDown or +/- keys to set the current time.
Time
The time format is:
Hour
:
00 to 23
Minute :
00 to 59
Second :
00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/
<PgDn> or +/- keys to set the current time.
IDE Channel Master/Slave
The onboard Serial ATA connectors provide Primary and Secondary
channels for connecting up to four Serial ATA hard disks. Each channel
can support up to two hard disks; the first is the “Master” and the
second is the “Slave”.
Press <Enter> to configure the hard disk. The selections include Auto,
Manual, and None. Select ‘Manual’ to define the drive information
manually. You will be asked to enter the following items.
Capacity :
Capacity/size of the hard disk drive
Cylinder :
Number of cylinders
Head :
Number of read/write heads
Precomp :
Write precompensation
Landing Zone :
Landing zone
Sector :
Number of sectors
The Access Mode selections are as follows:
CHS
(HD < 528MB)
LBA
(HD > 528MB and supports Logical Block Addressing)
Large (for
MS-DOS
only)
Auto
Remarks
: The main board supports one serial ATA ports and are
represented in this setting as IDE Channel 2.
Summary of Contents for iOne-MP171
Page 8: ...vii...
