_____________________________________________________________________
BIOS Setup Cybernet iOne-Medical PC
Page 20
Typematic Delay (Msec)
When the typematic rate is enabled, this item allows you to set the
time interval for displaying the first and second characters. By default,
this item is set to
250msec.
Security Option
This field allows you to limit access to the System and Setup. The
default value is
Setup
. When you select
System,
the system prompts
for the User Password every time you boot up. When you select
Setup,
the system always boots up and prompts for the Supervisor Password
only when the Setup utility is called up.
APIC Mode
APIC stands for Advanced Programmable Interrupt Controller. The
default setting is
Enabled
.
MPS Version Control for OS
This option is specifies the MPS (Multiprocessor Specification) version
for your operating system. MPS version 1.4 added extended
configuration tables to improve support for multiple PCI bus
configurations and improve future expandability. The default setting is
1.4
.
OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM
memory when used with OS/2 that depends on certain BIOS calls to
access memory. The default setting is
Non-OS/2
.
Report No FDD For WIN 95
If you are using Windows 95/98 without a floppy disk drive, select
Enabled to release IRQ6. This is required to pass Windows 95/98's SCT
test. You should also disable the Onboard FDC Controller in the
Integrated Peripherals screen when there's no floppy drive in the
system. If you set this feature to Disabled, the BIOS will not report the
missing floppy drive to Win95/98.
Small Logo (EPA) Show
The EPA logo appears at the right side of the monitor screen when the
system is boot up. The default setting is
Disabled
.
Summary of Contents for iOne-MP171
Page 8: ...vii...
