iv
3. Before suspending the unit, make sure the material used for
suspension is sturdy and stable. If not properly suspended, the display
unit may fall and cause serious injury to people standing nearby as
well as to the unit itself.
4. If you wish to mount the display unit, remember to use only the
mounting hardware recommended by the manufacturer.
Electrical and Power Source Related
1. This Monitor display unit must operate on a power source as shown
on the specification label. If you are not sure what type of power
supply used in the area, consult your dealer or local power supplier.
2. The power cords must not be damaged. Applied pressure, added
heat, and tugging may damage the power cord.
3. The power cord must be routed properly when setup takes place.
We advise that this aspect measure is to prevent people from stepping
on the cords or while the unit is suspended to prevent flying objects
from getting tangled with the unit.
4. Do not overload the AC outlets or extension cords. Electrical shocks
or fires may occur from overloading.
5. Do not touch the power source during a thunderstorm.
6. If your hands are wet, do not touch the plug.
7. Use your thumb and index finger, grip firmly on the power cord to
disconnect from the electrical socket. By pulling the power cord, may
result in damaging it.
8. If the unit is not going to be in use for an extended period of time,
remember to disconnect the unit.
9. The Monitor display unit uses voltage between 90-264VAC. Connect
the unit to a power source with the same numerical value as shown.
Summary of Contents for iOne-MP171
Page 8: ...vii...
