manualshive.com logo in svg

Cybernetics miSAN-V6, Operator'S Manual

The Cybernetics miSAN-V6 Operator's Manual is a comprehensive guide designed to help users maximize the potential of their miSAN-V6 device. This essential manual provides step-by-step instructions and valuable insights, ensuring seamless operation and optimal performance. Download your free manual today from our website, and embark on an unrivaled technology experience with the miSAN-V6.

Share
Download
background image

5

Cybernetics

UM-MV-12-B1-0801

SNMPWEBCARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Data Compression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

SCSI Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

SCSI HBA Ports  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

HBA X direction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
HBA X base SCSI ID  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
HBA X speed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Incoming iSCSI Connections from Hosts  . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

iSCSI login control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
iSCSI access password  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
iSCSI host username . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
iSCSI host password  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Outgoing iSCSI Connections to Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Remote iSCSI device X  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Device X DNS Name or IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Device X iSCSI Username . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Device X iSCSI password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Setup for using an external iSCSI device for additional Virtual Tape storage58
Network Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Hostname . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Default gateway  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Nameserver  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
ethX ( 1000 Mbps)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
ethX IP bonding  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
ethX IP address  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
ethX subnet mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
ethX MTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
bondX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
bondX IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
bondX subnet mask  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
bondX MTU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Message Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Send messages by email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
SMTP server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
SMTP username. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
SMTP password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Email address(es). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Admin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
User  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Advanced Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Advanced Menu(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Define Emulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Debugging  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Host iSCSI Debug Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Product Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Physical Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Virtual Devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Virtual device assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Credits and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Browser links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Devices Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Virtual Tape Drive Device Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Summary of Contents for miSAN-V6































































































































































































Reviews:

No comments

Related manuals for miSAN-V6

IBM DTTA-350320 Specifications preview
DTTA-350320
Brand: IBM Pages: 188
DataWhale RS-M2BF User Manual preview
RS-M2BF
Brand: DataWhale Pages: 31
LaCie 2big DOCK User Manual preview
2big DOCK
Brand: LaCie Pages: 48
Linksys NSLU2 - Network Storage Link NAS Server Quick Installation Manual preview
NSLU2 - Network Storage Link NAS Server
Brand: Linksys Pages: 64
Qsan XEVO Manual preview
XEVO
Brand: Qsan Pages: 28
Facom FAS.C8BK Assembly Manual preview
FAS.C8BK
Brand: Facom Pages: 2
Quantum DXi6500 series Planning Manual preview
DXi6500 series
Brand: Quantum Pages: 20
G-Technology G-SPEED SHUTTLE with Thunderbolt 3 Quick Start Manual preview
G-SPEED SHUTTLE with Thunderbolt 3
Brand: G-Technology Pages: 8
Addonics Technologies ST45HPMXA-B User Manual preview
ST45HPMXA-B
Brand: Addonics Technologies Pages: 8
DataDirect Networks StorageScaler 2460 Installation And User Manual preview
StorageScaler 2460
Brand: DataDirect Networks Pages: 46
DataDirect Networks SFA12K-20 Installation & Configuration Manual preview
SFA12K-20
Brand: DataDirect Networks Pages: 106
Infrant Technologies ReadyNAS 600B Installation Manual preview
ReadyNAS 600B
Brand: Infrant Technologies Pages: 2
Infrant Technologies ReadyNAS NV Getting Started Manual preview
ReadyNAS NV
Brand: Infrant Technologies Pages: 8
Infrant Technologies ReadyNAS Duo User Manual preview
ReadyNAS Duo
Brand: Infrant Technologies Pages: 98
Cavalry CAXA Series User Manual preview
CAXA Series
Brand: Cavalry Pages: 16
Cavalry CACE Series User Manual preview
CACE Series
Brand: Cavalry Pages: 16
Cavalry CADA-C32A Series User Manual preview
CADA-C32A Series
Brand: Cavalry Pages: 18
Rasilient PixelStor 300e Hardware Installation Manual preview
PixelStor 300e
Brand: Rasilient Pages: 43

Brands by name

Popular brands

Load more brands