1. Input Connector
Use this input connector to daisy chain the next Battery module. Remove the connector cover for
access.
2. On-board Replaceable Fuse Cover
Replaceable fuse is accessible from the rear panel. It must be done by qualified personnel.
3. Battery Output Connector
Use this output Connector to connect the Battery module to the Power module or to the next
Battery module.
CONNECTION #1 : POWER MODULE(UPS) WITH ONE BATTERY MODULE
Step 1:Loosen the two screws to remove the battery cable retention bracket of the Power
module.
Step 2:Use the battery cable of the Battery module to connect the Battery module to the Power
module.
Step 3: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable.
CONNECTION #2 : POWER MODULE(UPS) WITH MULTIPLE BATTERY
MODULES
Step 1:Connect the 1
st
Battery module to the Power module using battery cable. (Refer to above
steps of connection #1)
Step 2:Loosen the two screws to remove the battery cable retention bracket of the 1
st
battery
module.
Step 3: Use the battery cable to connect the 2
nd
Battery module to the 1
st
Battery module.
Step 4: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable.
TECHNICAL SPECIFICATIONS
Model
BPSE36V45A
BPSE72V45A
Battery
Sealed Maintenance Free
Lead Acid Battery
12V / 7Ah x3pcs x2sets
12V / 7Ah x6pcs x2sets
Rated Battery Voltage
36Vdc
72Vdc
Overload Protection
Fuse
Physical
Maximum Dimensions
(HxWxD) (mm)
225 x 151 x 394
337 x 196 x416
Weight (kg)
17.2
34.2
Environment
Operating Temperature
0
C to 40
C
Relative Humidity
0 to 90% (Non-condensing)
All rights reserved. Reproduction without permission is prohibited.
