background image

2

 

IMPORTANT SAFETY INSTRUCTIONS 

 
This manual contains important instructions that should be followed during installation and 
maintenance of the UPS and batteries. Please read and follow all instructions carefully during 
installation and operation of the unit. Read this manual thoroughly before attempting to 
unpack, install, or operate. 

CAUTION! 

The UPS must be connected to a grounded AC power outlet with fuse or circuit 

breaker protection. DO NOT plug the UPS into an outlet that is not grounded. If you need to 
de-energize this equipment, turn off and unplug the UPS. 

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! 

CyberPower 

Systems does not sell products for life support or medical applications. DO NOT use in any 
circumstance that would affect the operation or safety of any life support equipment, with any 
medical applications, or patient care. 

CAUTION! 

The battery can energize hazardous live parts inside even when the AC input 

power is disconnected. 

CAUTION! 

To prevent the risk of fire or electric shock, install in a temperature and humidity 

controlled indoor area, free of conductive contaminants. (Please see specifications for 
acceptable temperature and humidity range). 

CAUTION! 

To reduce the risk of electric shock, do not remove the cover, except to service 

the battery. There are no user serviceable parts inside, except for the battery. 

CAUTION! 

To avoid electrical shock, turn off the unit and unplug it from the AC power source 

before servicing the battery or installing a computer component. 

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! 

To reduce the risk of fire, do not 

use with or near aquariums. Condensation from the aquarium can come in contact with metal 
electrical contacts and cause the machine to short out. 

CAUTION! DO NOT USE WITH LASER PRINTERS! 

The power demands of laser printers 

are too large for a UPS. 
 

INSTALLING YOUR UPS SYSTEM

 

 

UNPACKING 

The box should contain the following: 
(1) PowerPanel

® 

Personal Edition software (CD) x1; (2) USB cable (A+B type) x1; (3) Telephone 

communication cable x1; (4) Power cord x2; (5) user manual x1; (6) UPS unit x1. 

OVERVIEW 

The CP1350EAVRLCD/ CP1500EAVRLCD provides automatic voltage regulation for 
inconsistent utility power. The CP1350EAVRLCD/ CP1500EAVRLCD features 1215 Joules 
of surge protection, and provides battery backup during power outages. The 
CP1350EAVRLCD/ CP1500EAVRLCD ensures consistent power to your computer system 
and its included software will automatically save your open files and shutdown your computer 
system during a utility power loss. 

HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR 

EQUIPMENT 

1.Make sure that the total Volt-Amp (VA) requirements of your computer, monitor, and 

peripheral equipment does not exceed 1350 VA/ 1500VA. 

2.Ensure that the equipment plugged into the battery power-supplied/surge outlets does 

not exceed the UPS unit's rated capacity (1350VA/810W for CP1350EAVRLCD, 1500VA 

Summary of Contents for CP1350EAVRLCD









Reviews: