background image

CPS1100AVR  

Guaranteed Uninterruptible Power System

 

 

 
TABLE OF CONTENTS 

 
 
 
 
 
 
 
 
Thank you for purchasing a CyberPower Systems Product.    To enjoy all the features and benefits of this 
Uninterruptible Power System (UPS), please read and follow all installation and operation instructions 
completely.    This UPS is designed to provide guaranteed power protection for connected electronic 
equipment.    The accompanying PowerPanel Plus™ software saves data, closes open applications and 
automatically shuts down your computer system in an intelligent and orderly manner. 

IMPORTANT SAFETY INSTRUCTIONS 

(SAVE THESE INSTRUCTIONS) 

This manual contains important safety instructions.    Please read and follow all instructions carefully 
during installation and operation of unit.    Read this manual thoroughly before attempting to install or 
operate. 
 

CAUTION! 

  To prevent the risk of fire or electric shock, install in a temperature and 

humidity controlled indoor area, free of conductive contaminants.    (Please see 
specifications for acceptable temperature and humidity range). 
 

CAUTION!  

To reduce the risk of electric shock, do not remove the cover secured by star 

shaped screws.    No user serviceable parts are inside except for the battery.    Refer 
servicing to qualified personnel. 
 

CAUTION! 

  The battery can energize hazardous live parts inside even when the AC input 

power is disconnected. 
 

CAUTION!  

UPS must be connected to an AC power outlet with fuse or circuit breaker 

protection.    Do not plug into an outlet that is not grounded.    If you need to de-energize this 
equipment, turn off and unplug the unit. 
 

CAUTION!  

To avoid electrical shock, turn off the unit and unplug it from the AC power 

source before servicing the battery or installing a computer component. 
 

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT!   

CyberPower Systems 

does not sell products for life support or medical applications or for use in any circumstance 
that would affect operation or safety of any medical for life support or medical applications or 
patient care. 

 
DO NOT USE WITH OR NEAR AQUARIUMS!

    To reduce the risk of fire, do not use with 

or near aquariums.    Condensation from the aquarium can cause the unit to short ou

t.

Determining Power Requirements---1 
Description---------------------------------1 
Hardware Installation Guide---------- 2 
Software Installation Guide------------2 
Software User Manual------------------4 

Battery Replacement---------------------6 
LED Indicators-----------------------------7 
Trouble Shooting Guide-----------------8 
Specifications------------------------------8 
Warranty------------------------------------9 

1

Summary of Contents for CPS1100AVR
















Reviews: