©2020 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
IV
SAFETY INSTRUCTIONS CONT.
PRODUCT SAFETY
RISK OF ELECTRIC SHOCK
Maintenance Bypass PDU (MBP) covered in this document are permanently-
connected equipment and only qualified maintenance personnel may carry out
installations.
Wiring must be done by qualified personnel.
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! Under no
circumstances should this unit be used for medical applications involving life
support equipment and/ or patient care.
DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not use
with or near aquariums. Condensation from the aquarium can come in contact with
metal electrical contacts and cause equipment to short out.
The unit has a dangerous amount of voltage.
DO NOT INSTALL THE MBP WHERE IT WOULD BE EXPOSED TO DIRECT
SUNLIGHT OR NEAR A STRONG HEAT SOURCE!
DO NOT CONNECT DOMESTIC APPLIANCES SUCH AS HAIR DRYERS TO MBP
OUTPUT SOCKETS!
A readily accessible disconnect device shall be incorporated in the building
installation wiring for AC Input.
Wiring Information: “Use No. 6 AWG, minimum 90°C copper wire and 18 lb-in
Torque force when connecting to AC wiring terminal”.
