74
Web Interface
3-Phase Intelligent PDU User Guide
Console Service
Select the Enable options to allow access using Telnet/SSH service and configure Telnet/SSH port
settings. See
System Tab > Network Service > Console Service.
System Tab > Network Service > Console Service
Item
Definition
Access
Allow Access
Enable access using Telnet or SSH version 2, which transmits user
names, passwords, and data in an encrypted format.
Telnet Settings
Telnet Port
The TCP/IP port that Telnet uses to communicate; 23 is the default
value.
Users can change the port setting to any unused port from 5000 to
65535 to enhance security.
Note: Telnet Client requires users to enter a space and the port number
after the PDU IP address on the command line to access the control
console.
