Smart Tower UPS 10-30KVA User Manual
Chapter 6 Operator Control and Display Panel
27
Functional key
Functions
EPO switch
To cut off the load power to shut down the rectifier, inverter, static
bypass and battery
HOME
To return the main menu
Left arrow and righ arrow
Select options in the mian menu, switch over secondary meun pages,
upward and downward roll the histrical log, add and subtract the
intered number
Enter key
confirm
6.2 LCD Display Type
After UPS achieves self-test starting screen completes self-inspection, main display shown in fig. 6-2
appears. The main panel display for 10KVA~30KVA type is provided with six main menus, turn on/off UPS,
mute or not button.
Fig. 6-2 Homepage display
6.2.1 Default
Screen
During the system running progress, if there is no alarm in 2 minutes, the system will show default
Screen. After a short delay, the display screen backlight goes off; press any key to reactivate the display
screen. Default screen is the homepage or the brand screen.
6.2.2 Data Screen
It is the data input screen as below Fig.6-3 (Press left and right buttons to select “I/P” in homepage,
then press “ENTER”.)
Fig.6-3 I/P data screen for 10KVA~30KVA UPS
The upper left
corner
symbol
" represents no
page to
left ( the left key is invalid ) page, right corner
displays symbols for"
representation can be right ( use the right page ), it is the same to other similar
corner pages. In I/P data interface, you can not input or modify data, just view them.