CZGL AT-16
CyberResearch
®
CPU Cards
80
©Copyright 2009
CyberResearch, Inc.
Figure 5-7: Dual RS-232 Cable Installation
Step 3:
Secure the bracket
. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis.
Step 0:
5.8.5 Floppy Drive Cable Connection
The FDD flat cable connects to the CZGL AT-16 to one FDD device. To connect an FDD
to the CZGL AT-16 please follow the instructions below.
Step 1:
Locate the FDD connector
. The location of the FDD device connector is shown
in
Chapter 3
.
Step 2:
Insert the connector
. Connect the FDD cable connector to the on-board
connector. See
Figure 5-8
. A key on the front of the cable connector ensures it
can only be inserted in one direction.
Summary of Contents for CZGL AT-16
