CyberResearch
®
CPU Cards
CZGL AT-16
CyberResearch, Inc
.
81
25 Business Park Drive
P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA
www.cyberresearch.com
Figure 5-8: FDD Cable Connection
Step 3:
Connect the cable to an FDD device
. Connect the connector at the other end
of the cable to an FDD device. Make sure that pin 1 on the cable corresponds to
pin 1 on the connector.
Step 0:
5.8.6 Parallel Port Cable without Bracket
The optional parallel port (LPT) cable respectively connects the on-board LPT 26-pin box
header to an external LPT device (like a printer). The cable comprises a 26-pin female
header, to be connected to the on-board LPT box-header, on one side and on the other
side a standard external LPT connector. To connect the LPT cable, please follow the
steps below.
Step 1:
Locate the connector
. The LPT connector location is shown in
Chapter 4
.
Step 2:
Align the connectors
. Correctly align pin 1 on the cable connector with pin 1 on
the CZGL AT-16 LPT box-header connector. See
Figure 5-9
.
Summary of Contents for CZGL AT-16
