CyberResearch
®
CPU Cards
CZGL AT-16
CyberResearch, Inc
.
71
25 Business Park Drive
P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA
www.cyberresearch.com
5.6.3 CF Card Setup
Jumper Label:
JCF1
Jumper Type:
2-pin header
Jumper Settings:
See
Table 5-4
Jumper Location:
See
Figure 5-3
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in
Table 5-4
.
CF Card Setup
Description
Open
Slave
Closed
Master
Table 5-4: CF Card Setup Jumper Settings
5.6.4 COM2 RS-232/422/485 Selection Jumper
Jumper Label:
JP1
Jumper Type:
8-pin header
Jumper Settings:
See
Table 5-5
Jumper Location:
See
Figure 5-3
The RS-232/422/485 Serial Port Select jumper sets the communication protocol used by
COM3. The RS-232/422/485 Serial Port Select settings are shown in
Table 5-5
.
RS-232/422/485
Description
1-2
RS-232
3-4
RS-422
5-6
RS-485
7-8
RS-485 with RTS Control
Table 5-5: COM2 RS-232/422/485 Selection Jumper Pinouts
Summary of Contents for CZGL AT-16
