CyberResearch
®
CPU Cards
CZGL AT-16
CyberResearch, Inc
.
79
25 Business Park Drive
P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA
www.cyberresearch.com
Figure 5-6: IDE Cable Connection
Step 3:
Connect the cable to an IDE device
. Connect the two connectors on the other
side of the cable to one or two IDE devices. Make sure that pin 1 on the cable
corresponds to pin 1 on the connector.
Step 0:
5.8.4 Dual RS-232 Cable with Slot Bracket
The dual RS-232 cable slot connector consists of two connectors attached to two
independent cables. Each cable is then attached to a D-sub 9 male connector that is
mounted onto a slot. To install the dual RS-232 cable, please follow the steps below.
Step 1:
Locate the connectors
. The locations of the RS-232 connectors are shown in
Chapter 3
.
Step 2:
Insert the cable connectors
. Insert one connector into each serial port box
headers. See
Figure 5-7
. A key on the front of the cable connectors ensures the
connector can only be installed in one direction.
Summary of Contents for CZGL AT-16
