CyberView RP-W819QD, User Manual

UM-CV-751-RP-W819QD-Q421V1 www.austin-hughes.com

P.17

*1. In order to control the device to operate in Zoom mode, the computer has to 

fi

 rst send    

     command code ” to switch the signal source from camera to VCR/DVR, at this time the device will  

     automatically zoom channel 1 video from VCR/DVR to full screen. User can then input a correspond- 

     ing channel code to zoom any other speci

fi

 c channel. Input the corresponding channel code again to  

     put the speci

fi

 c channel to freeze mode and send the code again to clear the freeze mode.

     Example: Input GE, (GE) B, (GE) C, and (GE) D for zooming the video signal in channel 1 to 4 from  

     VCR/DVR. Input “A”, “B”, “C”, “D” again to freeze the speci

fi

 c channel. Send command code “G”    

     again to get back to Live input mode.

*2. Computer has to send out command code “H” continuously for 2 seconds to switch the device be- 

      tween security lock ON and OFF mode. If any alarm is activated under security lock ON mode, the  

      device has to send out command code “H” continuously for more than 4 seconds to clear the alarm.

*3. Setup menu is switched ON by sending VCR/DVR and Lock button codes together. 

*4. Text Select and Cursor Control functions can be performed only under menu Setup mode.

 2.2

Right after computer/terminal has sent out the above mentioned control command code to the device, the

       device will respond with following status code back to computer through RS-232 port:

Status 

Code

Quad Status

Status 

Code

Quad Status

EF

Device in Quad mode

DE

CH1 in Sequence mode

EE

CH1 in Freeze mode

DD

CH2 in Sequence mode

ED

CH2 in Freeze mode

DB

CH3 in Sequence mode

EC

CH1 & 2 in Freeze mode

D7

CH4 in Sequence mode

EB

CH3 in Freeze mode

CF

Quad display in Sequence mode

EA

CH1 & 3 in Freeze mode

E9

CH2 & 3 in Freeze mode

E

CH1 in Full screen mode

E8

CH1, 2, & 3 in Freeze mode

D

CH2 in Full screen mode

E7

CH4 in Freeze mode

B

CH3 in Full screen mode

E6

CH1 & 4 in Freeze mode

7

CH4 in Full screen mode

E5

CH2 & 4 in Freeze mode

E4

CH1, 2 & 4 in Freeze mode

Attach to above code

E3

CH3 & 4 in Freeze mode

XX-DF

Buzzer/VCR ON

E2

CH1, 3, & 4 in Freeze mode

XX-7F

Security lock ON

E1

CH2, 3, & 4 in Freeze mode

XX-3F

Buzzer & Security lock ON (Stop)

E0

CH1, 2,3, & 4 in Freeze mode

< 4.3 > QD  Remote Control Connection & Operation