CYBEX 14051, Owner'S And Service Manual

Maintenance
Page 5-2

More Difficult Stains

• Dampen a soft white cloth with a solution of 10% household bleach (sodium hypochlorite), 90% water.    

   Rub gently. Rinse with a water dampened cloth to remove bleach concentration.

• The same procedure can be used with full strength household bleach, if necessary.

• Allow bleach to puddle on the affected area or apply with a soaked cloth for approximately 30 minutes.    

  Rinse with a water dampened cloth to remove any remaining bleach concentration.

Alternative Method for Difficult Stains

• Dampen a soft white cloth with rubbing alcohol and rub gently. Rinse with a water dampened cloth to  

   remove any remaining rubbing alcohol concentration.

NOTE: To restore luster, a light coat of spray furniture wax can be used. Apply for 30 seconds and follow  

     with a light buffing using a clean white cloth.

Please Review Carefully

When using strong cleaning agents such as rubbing alcohol or bleach, it is advisable to   first test in an incon-
spicuous area. Other cleaning agents may contain harsh or unknown solvents and are subject to formula 
changes by the product manufacturer without notice. Should you desire to use other cleaning agents, carefully 
try them in an inconspicuous area to determine potential damage to the material. Never use harsh solvents or 
cleaners which are intended for industrial applications. To clean stained or soiled areas, a soft                
white cloth is recommended. Avoid use of paper towels.

Cleaning products may be harmful/irritating to your skin, eyes, etc. Use protective gloves and eye protection. Do 
not inhale or swallow any cleaning product. Protect surrounding area/clothing from exposure. Use in a well ven-
tilated area. Follow all product manufacturer’s warnings. CYBEX and its vendors cannot be held responsible for 
damage or injuries resulting from the use or misuse of cleaning products.

 2.  Frames - 

Wipe down all frames using a mild solution of warm water and car wash soap. Be sure to dry  

 thoroughly. 

AVOID 

acid or chlorine based cleaners and also cleaners 

containing abrasives as these could scratch or damage the equipment.

 3.  Chrome - 

Clean chrome tubes, first using chrome polish and then using a car wax seal. 

Neutral cleaners with a pH between 5.5 and 8.5 are recommended. Be sure to dry 

 thoroughly. 

AVOID 

acid or chlorine based cleaners and also cleaners containing abrasives

as these could scratch or damage the equipment.

Cybex Total Access Owner’s Manual