Cybex 530C and 530R Owner’s Manual
Preventive
Maintenance
Page 4-10
Static Electricity -
Depending upon where you live, you may experience dry air, causing a common
experience of static electricity. This may be especially true in the winter time. You may notice a static
build-up just by walking across a carpet and then touching a metal object. The same can hold true
while working out on your unit. You may experience a shock due to the build-up of static electricity on
your body and the discharge path of the unit. If you experience this type of situation, you may want to
increase the humidity to a comfortable level through the use of a humidifier.
Humidity -
The unit is designed to function normally in an environment with a relative humidity range
of 30% to 75%.
NOTE:
Do not install or use the unit in an area of high humidity, such as in the vicinity of a steam room,
sauna, indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bromine
could adversely affect the electronics as well as other parts of the machine.
Temperature
- The unit is designed to functionally normally in an environment with an ambient
temperature range of 50
o
F (10
o
C) to 104
o
F (40
o
C) degrees.
Humidity -
The unit can be shipped and stored in an environment with a relative humidity range of
10% to 90%.
NOTE:
Do not store the unit in an area of high humidity, such as in the vicinity of a steam room, sauna,
indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bromine could
adversely affect the electronics as well as other parts of the machine.
Temperature
- The unit can be shipped and stored in an environment with an ambient temperature
range of 32
o
F (0
o
C) and 140
o
F (60
o
C) degrees.
Batteries -
If storing the unit for periods in excess of six months, remove the batteries. See
Rechargeable Batteries
section for location of batteries.
8. Check the tension of the primary belt.
A.
The primary drive belt tension is self adjusting. Check the tension arm and spring for
movement
and
tension.
9. Check the tension of the secondary belt.
A.
The secondary drive belt tension is self adjusting. Check the tension arm and spring for
movement
and
tension.
Environment
Storage
