Cybex 530C and 530R Owner’s Manual
The Cybex 530 Cycles are designed with rechargeable batteries. The batteries will recharge during
regular operation of the cycle. The batteries will also be charged when the optional power adapter is
plugged in.
Battery Replacement -
The Cybex 530 Cycles use five AA 1.2v 1600mAh or higher NiMH
(Nickel-Metal Hydride) batteries. See Figure 16.
! WARNING: DO NOT open battery, dispose of in fire, put in backwards, mix with other battery
types or short circuit. Battery may ignite, explode, leak or get hot causing injury.
Replace batteries with AA NiMH batteries only.
DO NOT
use Alkaline, Carbon Zinc, Lithium Ion, Nickel
Cadmium (NiCd) or any other kind of battery.
! WARNING: Use only NiMH batteries. Use of any other kind of battery may cause them to leak,
rupture or explode, resulting in personal injury and property damage.
Always replace all batteries at the same time, never leave an old battery in the company of new ones.
Using any old battery with new batteries will result in overheating the old battery, non-charging of the
new batteries and possible leaking or rupturing.
Always use five equal batteries, of the same current rating and manufacturer.
Battery Charging -
If possible, charge the batteries fully before installing them or allow the cycle to
re-charge the batteries by attaching the optional power supply.
Figure 16
DE-18250-4
CORRECT BATTERY ORIENTATION
SERIOUS INJURY COULD OCCUR IF THESE
PRECAUTIONS ARE NOT OBSERVED
1. Read and understand the Owner's Manual and all
warnings posted on the unit before using.
2. Use only NiMH (Nickel-Metal Hydride) batteries.
AA 1.2v 1600mAh or higher NiMH.
3. Install batteries with positive (+) end down.
4. Dispose of used batteries appropriately.
WARNING
Preventive
Maintenance
Page 4-11
Rechargeable Batteries
