Cybex Arc Trainer 630A Owner’s Manual
The Arc Trainer 630A is designed with no-maintenance parts. Although there are grease fittings on the
pillow blocks, re-lubrication of the bearings is not required.
Elevation Motor Lubrication -
In time the elevation motor pivot points may develop a squeak. If a
squeak is present, the unit will need to be serviced by a qualified service technician
.
Lubrication
Static Electricity -
Depending upon where you live, you may experience dry air, causing a common
experience of static electricity. This may be especially true in the winter time. You may notice a static
build-up just by walking across a carpet and then touching a metal object. The same can hold true
while working out on your unit. You may experience a shock due to the build-up of static electricity on
your body and the discharge path of the unit. If you experience this type of situation, you may want to
increase the humidity to a comfortable level through the use of a humidifier.
Humidity -
The unit is designed to function normally in an environment with a relative humidity range
of 30% to 75%.
NOTE:
Do not install or use the unit in an area of high humidity, such as in the vicinity of a steam room,
sauna, indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bromine
could adversely affect the electronics as well as other parts of the machine.
Temperature
- The unit is designed to function normally in an environment with an ambient
temperature range of 50
o
F (10
o
C) to 104
o
F (40
o
C) degrees.
Environment
Storage
Humidity -
The unit can be shipped and stored in an environment with a relative humidity range of
10% to 90%.
NOTE:
Do not store the unit in an area of high humidity, such as in the vicinity of a steam room, sauna,
indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bromine could
adversely affect the electronics as well as other parts of the machine.
Temperature
- The unit can be shipped and stored in an environment with an ambient temperature
range of 32
o
F (0
o
C) and 140
o
F (60
o
C) degrees.
Preventive
Maintenance
Page 4-5
Summary of Contents for Arc 630A
