14
Cybex 18030 Bravo Lift Owner’s Manual
If
Then
18030 Cannot fit
through doorway
Two people will be required for this procedure
Separate frame
1.
Remove the eight BHSCS securing the platform to the frame using
a 7/32”Allen wrench and a 9/16” wrench.
BHSCS/
Locknut
Qty 8
2.
Move machine to desired location.
3.
Reattach frame halves and securely tighten the BHSCS and
locknuts.
Securely anchor machine to the floor
To maximize stability, equipment must be secured to a solid level surface.
•
Cybex is not responsible for the actual anchoring of equipment. Consult with a professional
contractor.
•
Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).
•
If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
frame not in contact with surface using flat washers.