background image

 8

Cybex 18030 Bravo Lift Owner’s Manual

Warnings and Cautions

Warning decals indicate a potentially hazardous situation that could result in death or serious injury if 

the precautions are not observed.
Caution decals indicate a potentially hazardous situation that could result in minor or moderate injury 

if the precautions are not observed.
The diagram following the decals show where each decal is located.

125

1:1

OWATONNA

MFG. APPR.

TECH. PUBS. APPR.

DATE

DATE

REV.

DWG. NO.

SCALE

SIZE

CHECKED BY

DWG. BY

TITLE:

FINISH:

MATERIAL:

B

SHEET

  OF

1

EXCEPT AS NOTED

GENERAL

TOLERANCES:
2 DECIMALS  ± .03

3 DECIMALS  ± .015

ANGLES  ± 1°

FEATURES SHOWN

PERPENDICULAR OR

PARALLEL SHALL BE

SO WITHIN ± 1°

REMOVE ALL BURRS

BREAK SHARP EDGES

.005/.010 R

SURFACE FINISH

INDICATED PER

ANSI B46.1-1985

GENERAL

MACHINING

DIMENSIONS

IN INCHES

DATE

DATE

REMOVE CARBURIZATION

AND SCALE FROM LASER

AND PLASMA CUT EDGES

B

WARNING DECAL, ENGLISH

4605-381-4

EML

3/26/2007

NOTE:

 See Engineering Drawing 4506-381-X for specifications.

ALL MATERIAL MUST COMPLY TO

EUROPEAN UNION DIRECTIVE

2002/95/EC RoHS (RESTRICTION

OF HAZARDOUS SUBSTANCES)

4605-381-4 B

WARNING

SERIOUS INJURY  COULD OCCUR IF  THESE PRECAUTIONS  ARE NOT OBSERVED

2. Read and understand warning labels and user manual prior to exercising. Obtain instruction prior to use.

1. Obtain a medical exam prior to beginning an exercise program.

3. Keep body and clothing free from and clear of all moving parts.

4. Inspect machine prior to use. DO NOT use if it appears damaged or inoperable.

5. DO NOT attempt to fix a broken or jammed machine. Notify floor staff.

6. Use the machine only for the intended use. DO NOT modify the machine.

7. Be sure that the weight pin is completely inserted. Use only the pin provided by the manufacturer. If unsure seek assistance.

8. Never pin the weights in an elevated position. DO NOT use the machine if found in this condition. Seek assistance from floor staff.

9. Children must not be allowed near this machine. Teenagers must be supervised.

10. DO NOT use if guards are missing or damaged.

11. DO NOT use dumbbells or other incremental weights, except those provided by the manufacturer.

12. Inspect all cables and belts and connections prior to use. DO NOT use if any components are worn, frayed, or damaged.

13. DO NOT REMOVE THIS LABEL. REPLACE IF DAMAGED.

2.25

R .19 4 PLACES

PART NUMBER WITH REVISION DESIGNATION 7 PT ARIAL

12 PT ARIAL FONT

R .25 4 PLACES

INSET .06 WHITE

SAFETY ORANGE PMS 152 BLACK TRIANGLE W/ ORANGE EXCLAMATION POINT, BLACK LETTERS 23 PT ARIAL BOLD FONT

8.00

8.25 PT ARIAL FONT

WHITE BACKGROUND BLACK LETTERS

Summary of Contents for Bravo Lift































Reviews: