Web Manager "Settings" Menu Options
137
Configuring IPDU Power Management
T
To Configure a User to Manage Power
Outlets on a Connected IPDU
This procedure assumes the following prerequisites:
•
An AlterPath PM IPDU is connected to the AUX port of the OnBoard.
•
The AUX port is configured for power management (as described in “To
Configure an AUX Port for IPDU Power Management” on page 128).
•
The user account has been defined under “To Create and Authorize a User
for Device Management” on page 174.
1.
Log into the Web Manager as an administrative user.
2.
Go to Settings
→
IPDU
→
Users.
3.
Click the “Add User” button.
4.
Enter the name of a user in the “Username” field.
5.
Enter the outlets to manage in the “Outlets” field.
6.
Click OK.
7.
Click “Save and apply changes.”
Configuring Names and Power Up Intervals for
Outlets on a Connected IPDU
On the Outlets screen under Settings
→
IPDU, an administrative user can
assign a name to a power outlet and change the number of seconds that must
elapse between when the selected outlet is turned on and another outlet can be
turned on.
The following figure shows the default screen. The Name column is empty
because no names have been configured for any outlets. The default power up
interval of 0.5 seconds displays in the “Interval” column if an administrator
has not previously changed any of the intervals.
Summary of Contents for AlterPath OnBoard
