Configuring PCMCIA Cards
148
AlterPath OnBoard Administrator’s Guide
2.
To enable DHCP, check the DHCP checkbox, and go to Step 4.
3.
To define basic network parameters that enable the use of a static IP
address, do the following steps.
a.
Enter an IP address in the “IP Address” field.
b.
Enter a netmask in the “Network Mask” field.
c.
Enter the IP address for a gateway host or enter “none” in the
“Gateway” field.
4.
Click OK.
5.
Click “Save and apply changes.”
Configuring a Compact Flash PCMCIA Card
When a compact flash card is inserted in the selected slot, clicking the
“Configure” button on the Settings
→
PCMCIA screen brings up a dialog like
the one shown in the following figure.
Figure 5-30 shows the “Mount Compact Flash Card” checkbox unchecked
Figure 5-29:
Settings
→
PCMCIA
→
Configure Compact Flash Dialog:
Mount Option Unchecked
Figure 5-30 shows the “Mount Compact Flash Card” checkbox checked, and
the “Auto” option selected from the “File System” pull-down menu.
Summary of Contents for AlterPath OnBoard
