Configuring Sensor Alarms
208
AlterPath OnBoard Administrator’s Guide
T
To Configure a Pager Sensor Alarm Action
1.
Perform Step 1 through Step 8 in the procedure “To Begin Configuring a
Sensor Alarm” on page 202, selecting “Pager” from the “Action” menu in
Step 7.
2.
Enter the phone number of the pager or phone to be contacted in the
“Pager/phone number” field.
3.
Enter the user name required for authentication in the “SMS username”
field.
4.
Enter the IP address of the SMS server in the “SMS server” field.
5.
Enter the SMS port number in the “SMS port” field.
6.
Enter any desired message in the “Message” field.
7.
Click OK.
8.
Click “Save and apply changes.”
Configuring an “Email” Sensor Alarm Action
The following figure shows the fields that appear when “Email” is selected on
the “Action” menu on the Config
→
Sensor Alarms screen that is shown in
Figure 6-30:
Config
→
Sensor Alarms Email Message Fields
Summary of Contents for AlterPath OnBoard
