Web Manager "Network" Menu Options
245
Configuring Static Routes
The following table describes the fields and menu options that appear when
you select the “Edit” or “Add” buttons.
T
To Add a Static Route
1.
Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager” on page 75, if needed.
2.
Go to Network
→
Static routes.
3.
Enter a network IP address in the “Network Address” field.
4.
Select “Interface” or “Gateway” from the “Type” pull-down menu.
5.
Enter the number of hops to the destination in the “Metric” field.
6.
Click “Apply.”
7.
Click the “Save and apply changes” button.
Table 7-3:
Fields and Menus for Configuring Static Routes
Field or Menu Name
Definition
Network Address
Enter the IP address of the destination host or specify a
network in the form
networkIPaddress
/
mask_length
(also
referred to as prefix/length).
Note:
To set a default route, go to Network
→
Host Settings.
Type
Pull-down menu choices are “Gateway” or “Interface.”
Interface/Gateway
• When “Interface” is selected from the “Type” menu, the
“Interface/Gateway” menu choices are:
•Public 1
•Public 2
•Failover
•PCMCIA 1
•PCMCIA 2
• When “Gateway” is selected from the “Type” menu, a field
appears for entering the IP address of the gateway.
Metric
Enter the number of hops to the destination.
Summary of Contents for AlterPath OnBoard
