6)
Relay installation instructions.
a)
Mount the relay and the relay mount plate (Item 4) to the frame link connection
located on the side of the battery box.
b)
Wire your winch according to the manufacturers’ instructions.
7)
Included in this kit is a switch mount bracket and back plate (Items 6 & 7) that will work
for many different switch types. If used, mount them to the dash somewhere where it will
be easily accessible to the operator. Do Not mount the bracket where it could cause
injury entering, exiting or operating the vehicle.
8)
Place the front bumper on a work bench or the floor and install the roller hawse to the
front bumper as shown in the image below.
a)
Step 1: Assemble the roller hawse, roller hawse plates, bolts, washers and lock nuts.
5
