Tighten mounting hardware at this time.
CYCLE COUNTRY 1500/2000 WINCH
MOUNTING INSTRUCTIONS
Using the 5/16” x 1” bolt and 5/16” x 1-1/4” bolt, mount the Winch and Roller Hawse Mount
Plate to the Winch Mount Plate. Be sure that when the Winch is mounted to the ATV the Winch
Motor is on the
LEFT
side of the machine. GO TO NEXT INSTRUCTION.
Remove one of the long rollers and the two side rollers and feed the winch cable through
the roller hawse. Reinstall the rollers and be sure rollers move freely.
See Winch Wiring Instructions supplied with the Winch for proper installation.
WARN 2000/2500 WINCH MOUNTING INSTRUCTIONS
Using the four 5/16” x 3/4” bolts PROVIDED WITH THE WARN WINCH, the Winch
can be mounted to the Winch Mounting Plate. Be sure that when the Winch is mounted to the
ATV, the Winch Motor is to the
RIGHT
side of the machine. GO TO NEXT INSTRUCTION.
Remove one of the long rollers and the two side rollers and feed the winch cable through
the roller hawse. Reinstall the rollers and be sure rollers move freely.
See Winch Wiring Instructions supplied with the Winch for proper installation.
4
