3.
Attach the Roller Hawse Mount Plate to the front bumper of the
ATV using 5/16” x 1-1/8” x 1-3/4” U-Bolts and Nylock Nuts.
Remove one of the long rollers and the two side rollers and feed the winch cable through
the roller hawse. Reinstall the rollers and be sure rollers move freely.
Attach the Roller Hawse to the Roller Hawse Mount Plate using the 3/8” x 1” Bolts and
Nylock Nuts provided with the winch. Tighten all hardware.
See Winch Wiring Instructions supplied with the Winch for proper installation.
4
