Figure 5-Speed Change Unit
2. GEAR BOX AND CLUTCH LUBRICATION
Maintain oil level in sight windows "W" (Figure 7). To fill gearbox, remove plug "C"(Figure 7) use Automatic
Transmission Fluid Mobil 200 (Esso ATF or equivalent Change oil every 500 hours).
To drain oil, remove the Drain Plug "M" located under the oil gear box (Figure 7).
Figure 7-Gear Box Lubrication
※
CAUTION
：
USE OF ANY OTHER TYPE OF OIL IN THE GEARBOX MAY RESULT IN DAMAGE TO THE CLUTCH
SURFACES.
3. HEADSTOCK LUBRICATION
The headstock spindle is mounted on precision preloaded ball bearings. The ball bearings are grease packed
for life and require no further lubrication.
TOP
To change spindle speeds. Push start button "D" (Figure 8). Turn cam switch "C" (Figure 10) to the forward or
reverse position and move lever "G" (Figure 9) to the start position. Turn cam switch "D" (Figure 10) right to
increase speed or turn left to decrease speed.
Figure 8-Control Unit Door
Figure 9-Control Speed and Direction
