12
Setup Coded Sensor ID 1
1) From [MAIN MENU] press [DOWN ARROW] to scroll
through and press [STATS].
2) Press [STATS] to enter [CODED SENSOR ID].
Note: Each console is coded to the hub of its Indoor Cycle. It is advised
that you note the HUB ID of each Indoor Cycle. When the batteries in the
hub are replaced you must relearn the HUB ID.
IMPORTANT: You can only execute the “LEARN” function on one Indoor
Cycle at a time. Make sure all other Indoor Cycles are asleep. To ensure
Indoor Cycles are asleep leave untouched for approximately 4 minutes.
Setup Coded Sensor ID 2
3) Press [STATS] to enter [HUB].
4) Press [STATS] to toggle through all digits until LEARN 1 is displayed.
5) Press and hold [STATS] until LEARN 1 fl ashes.
6) Once the console learns the Hub ID it will be displayed.
7) Press [DOWN ARROW] to scroll to [RETURN] and press [STATS] to return to
[MAIN MENU].
STATS
RESET
STATS
RESET
Main Menu
Time and Date
Modes
Î
Coded Sensor ID
Return
Coded Sensor ID
Î
Hub
LEARN
1
Stats
00000
Heart
00000
Reset
Return
