RELEASE DATE:
BY:
REVISION DATE:
REV
PRODUCT NAME:
PRODUCT NUMBER:
ASSEMBLY INSTRUCTIONS
Bike Check Parking System
This installation instruction will describe the steps to assemble a Bike Check rack.
Item Amt
Description
1
8
Support Bar
2
10 U-Bolt
3
10 Inner Leg
4
10 Outer Leg
5
4
End Cap (1-1/4")
Foot Pads are provided with holes for staking
ALWAYS OBSERVE POSTED SAFETY GUIDELINES WHEN ASSEMBLING THIS PRODUCT
ALWAYS WEAR SAFETY GLASSES
Part No.
SCOPE:
16-Jun-10
4-Nov-14
GM
bm
Bike Check
12490
12457
12456
12466
12465
12464
1. First, slide the Inner Leg (12457) onto
the 8-ft long Support Bar (12465) and align
the holes.
2. Slide the Outer Leg (12456) onto the
Inner Leg (12457) and align the holes.
3. Insert the U-Bolt (12464) through the
aligned holes to hold the end of the
assembly together.
4. Tap the End Cap (12466) tightly into the
Outer Leg.
STEP-1
STEP-2
STEP-3
STEP-4
NO TOOLS
NEEDED!
Apply your padlock or heavy "zip" tie
to the hasp for security.
