Aluminum
Tow bar (tongue)
Roll bars, 3 for Large
2 for Small or 2 Cozy Roll
bars
Seat post hitch –various sizes
Hitch nut
Rack hitch
Fabric
Bottom Fabric—Large or Small/Cozy
Plastic insert for bottom
Canopy top– Small, Cozy or Large
Front Mesh cover-Small, Cozy or Large
Front vinyl cover—Small, Cozy or Large
Back Cover– Large, Small or Cozy
Miscellaneous
Hardboard floor
Hex key 3/16
Safety flag
Safety strap
red set screws
Seat Post Hitch
Attach the hitch to the seat post with the bevel facing upward at a height which allows the trailer to be as parallel to the ground as
possible. Open, then re-tighten the hitch’s collar evenly on both sides of the seat post by screwing each bolt in part way, and ro-
tating between bolts as you tighten. Tighten the hitch to the seat post so that it cannot move.
The ball joint is at the tip of the tow bar. Feed the ball joint, top to bottom, through the hitch. The ball joint should rotate freely in
the hitch.
Attaching Trailer to Seat Post Hitch
Spin the hitch nut onto the ball joint’s threads, with the teeth pressing against the
hitch. Hand tighten firmly.
Safety Strap
Wrap the safety strap around the seat post and attach, keeping it loose enough to
avoid binding while cornering.
Rear Reflector
Install the rear reflector on the mount at the rear center of the trailer. The optional Blinky light can be mounted here instead.
Safety Flag
Join the two pieces of the flagpole to make a 6’ long pole. Insert the safety flag into the tube at the left rear of the trailer. The
movement of the flag draws drivers attention and makes the trailer more visible.
Owner’s Manual
Please read and understand your Owner’s Manual.
Dog Tip : On the first few rides, leash your dog in at two points so there is no chance of jumping out.
Hitch
Safety Strap
Ball Joint
Tow Bar
Hitch Nut
3
