CyClone AB14, Installation And Operation Instructions Manual

7

Cyclone Canopy Installation - English

WALL MOUNT INSTALLATION - PARTS SUPPLIED

1 × Hood

1 × Chimney Flues

(Top and Bottom)

1 × Round Adapter

(May be Pre-Installed)

1 × Upper Mounting Bracket

HARDWARE PACKAGE

4 × Mounting Screws

(Long and Medium, 2 each)

4 × Drywall Anchors

(Large and Small, 2 each)

2 × Washers

1 × Oil Cup

6 × Adapter Screws

2 × Top Chimney Screws

FOR PYRAMID SHAPE HOODS ONLY:

2 × Bottom Chimney Screws

WALL MOUNT INSTALLATION - TOOLS AND MATERIALS REQUIRED

•  Electrical drill or ratchet driver 

•  ½” drill bit for drilling pilot holes 

•  1 ¼” drill bit for drilling electrical wiring access 

hole (if applicable)

•  Phillips screwdriver #2 or driver bit

•  Wire stripper or cutter  

•  Tape measure 

•  Aluminum foil tape and/or duct tape 

•  Electrical supplies for wiring (i.e.  marrets, 

electrical tape)

•  Hammer 

•  Jigsaw or saber saw

•  Drywall stud (if applicable)

•  Step ladder

•  Stud finder 

•  Level

1 × Plastic Adapter Seal

PRE-INSTALLED

2 or 4 × LED Lights 

(1.5W per bulb)

*Bulb & socket may change.