background image

15

DV160 Installation - English

CYCLONE LIMITED WARRANTY

North America Range Hoods Inc. (hereunder called “The Company”) provides a warranty that its products are free from defects in 

workmanship and materials for a period of five (5) years from the date of purchase for the following models: DV160 and SV130, and for a 

period of three (3) years for the following models: CG180, CG110. During that time period, The Company will, at the Company’s option, 

repair or replace without charge any parts or complete unit found to be defective.  This warranty is not transferable from the original 

purchaser. The company reserves the right to use functionally equivalent reconditioned parts or products as warranty replacement or as 

part of warranty service. Warranty does not cover the costs of removal, installation and/or transportation of defective products.

THE COMPANY WILL NOT BE HELD RESPONSIBLE FOR ANY CLAIMS OVER THE ORIGINAL PURCHASE PRICE OF 

THE PRODUCTS NOR BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN 

CONNECTION WITH PRODUCT USE OR PERFORMANCE.

Some provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may 

not apply to you.

The unit removal and re-installation works are under the customer responsibility.

This warranty does not cover any costs related to the products including but not limited to: 

a) Normal maintenance service required for the products; b) filters, roof caps, wall caps and other accessories for ducting; c) natural 

wear of the finish of the products or wear caused by improper maintenance, use of corrosive and abrasive cleaning products; d) products 

or parts which have been subject to freight damage, misuse, negligence, accident or any other circumstances beyond the control of The 

Company. 

The warranty will be automatically void if any of the following apply:

•  Commercial use of the products or use otherwise inconsistent with its intended purpose;

•  The function of part or the complete assembly has been modified or repaired by unauthorized person;

•  Faulty installation or installation contrary to recommended installation instructions:

•  Ventilation system has not been vented to the outside or ventilation system stuck;

•  Less than 5” round or equivalent ductwork has been used anywhere in the venting system;

•  The venting duct blocked anywhere in the venting system;

•  Wrong electrical wire connection for the fan

.

To qualify for warranty service you must: (a) notify us at the address telephone number stated below within 2 days of the discovery of the 

defect; (b) provide the model number and serial number; and (c) describe the nature of any defect in the product or part. 

At the time of requesting for service, you must present evidence of your proof of purchase and proof of the original purchase date. If 

we determine that the warranty exclusions listed above apply or if you fail to provide the necessary documentation to obtain service, 

customer will be responsible for all shipping, travel, labor and other costs related to the service

For warranty services or repair, please contact the dealer from whom you purchased the product or the address shown below.

North America Range Hoods Inc.

1361 Huntingwood Drive, Unit 16

Scarborough, ON   M1S 3J1

Tel: 1-888-293-5662 or (416) 293-0933  Fax (416) 293-4793

Email: Info@CycloneRangeHoods.com

Website: www.CycloneRangeHoods.com

Summary of Contents for DV160































Reviews: