EN - 14 -
PART - 1.
BEFORE USING THE APPLIANCE
General warnings
WARNING:
Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
WARNING:
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recommended
by the manufacturer.
WARNING:
Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
WARNING:
Do not damage the refrigerant circuit.
WARNING:
To avoid a hazard due to the instability of the appliance,
it must be fixed in accordance with the instructions.
WARNING:
When positioning the appliance, ensure the supply
cord is not trapped or damaged.
WARNING:
Do not locate multiple portable socket-outlets or portable
power supplies at the rear of the appliance.
Symbol ISO 7010 W021
WARNING:
Risk of fire / flammable materials
• If your appliance uses R600a as a refrigerant (this information
will be provided on the label of the cooler) you should take
care during transportation and installation to prevent the cooler
elements from being damaged. R600a is an environmentally
friendly and natural gas, but it is explosive. In the event of a
leak due to damage of the cooler elements, move your fridge
away from open flames or heat sources and ventilate the room
where the appliance is located for a few minutes.
• While carrying and positioning the fridge, do not damage the
cooler gas circuit.
• Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.