CYP AU-11CA-4K22, Operation Manuals

2

2

5. FEATURES

• 

 HDMI input and output with 18Gbps (600MHz) 4K UHD+ support

•   DVI 1.0 compliant with the use of an HDMI-DVI adaptor
•   HDCP 1.4 and 2.2 compliant
• 

 Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 

4096x2160@60 Hz (YUV 4:4:4, 8-bit)

• 

 Supports 48-bit Deep Color up to 1080p60

•   Supports pass-through of LPCM 7.1, bitstream and HD bitstream 

audio formats over HDMI

• 

 Supports embedding external audio sources (analog stereo or 

digital S/PDIF) into an existing HDMI source, or adding audio to a 

DVI source (output as HDMI)

• 

 Supports HDMI audio sampling rates up to 192 kHz

• 

 Supports the following S/PDIF audio sampling rates: 32kHz, 44.1 kHz, 

48 kHz, 88.2 kHz, 96 kHz, 192 kHz

• 

 Provides EDID management with EDID bypass and 2 user modifi able 

EDIDs

•   PC based EDID management tool support
•   Outputs a 720p60 color bar pattern when no input is connected
•   Supports RS-232 style control via a Virtual COM port over USB

Note:

 4K UHD+ sources or equivalently high-bandwidth signals require 

an appropriate compatible display and HDMI cables in order to 

achieve the best image quality. The use of “Premium High Speed 

HDMI” cables is highly recommended.

3

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

LINK

SERVICE

L/R

AUDIO

LOCK

BYPASS

OPTICAL

POWER

POWER

1

2

3

4

5

1

 POWER & POWER LED: 

Press this button to power the unit on or off. 

The LED will be lit when the unit is receiving power.

Note: 

Press and hold the Power button for 3 seconds to perform a 

factory reset. Release the button once the LEDs begin fl ashing.

2

 LINK: 

This LED will illuminate to indicate that a live source has been 

detected on the input port. When no source is detected the LED 

will remain off.

3

 AUDIO LOCK: 

 The LED will illuminate when Audio has been 

detected

4

 BYPASS/OPTICAL & L/R: 

This switch selects the source of the 

audio to be embedded in the HDMI output. “BYPASS” passes the 

audio directly from the HDMI input to the HDMI output without 

modifi cation. “OPTICAL” embeds the audio from the optical S/PDIF 

audio input (LPCM 2.0 or bitstream). “L/R” embeds the audio from 

the analog stereo inputs (LPCM 2.0 only).

5

 SERVICE:

 This slot is for EDID management, control and fi rmware 

update use. Connect directly to your PC/laptop using a standard 

Mini-USB cable to connect using the PC software or to send 

commands (via virtual COM port).