14
6.6 PC Application Control
Use the link http://cypress.com.tw to download the software
application of 1 By 4 HDMI 4K UHD Video Wall Splitter and execute it
to control the Video Wall system.
Note: Before installing, remove any former verion that was existing.
Once the application is installed successfully, click and open the
“Video Wall Set”.
1
1
Search MAC:
Click on “Search MAC” to confirm how many TV Wall
unit(s) is within the network system then, select from here with the
unit you wish to control.
Note: This action should be executed every time when the unit is
power On or reset or re-run the “CDPS-4KQ AP” application.
Select the unit that is to be adjusted then pressed “Connect” to
connecting the unit.
Every time when the unit is connected successfully, a dialog will
appear showing “refresh completed” base on the selected MAC
and the application will display current unit’s status. However,
image display will not be refreshed automatically and can only be
refreshed manually.
When using more than 1 unit for a TV Wall setting, set up unit’s ID
number is required to ensure the correct display of each single TV
wall image.