16
6.5.4 Video Switch Tab
This tab provides video/audio routing control as well as control over
HDCP behavior, Input and Output names, Text Screen intermission
details, and the Countdown Timer.
1) Auto Source Switch:
Enable or disable the automatic input
switching feature of this unit. When enabled, the unit will
automatically switch to the most recently connected/detected
input. If the current input’s signal is lost, the unit will automatically
switch to the other input.
2) Text Screen:
The Text Screen intermission output can be used when
the user wants to stream a simple text screen to indicate that
there is not currently any live video to view. It may be enabled or
disabled here.
Note: Enabling or disabling this feature may disconnect any
currently connected streaming clients.
3) Video Switch:
To assign a new video route, please click the Output
button and then click on the button of the preferred Input port
to route. As you select each button they will change their color
to orange. The new route will become active immediately and
the routing information displayed on the buttons will change
accordingly.
■ Output:
Click on this button to begin routing selection as
detailed above. Click the Edit icon ( ) to open the Output Edit
window and modify additional Output settings.
■ Input:
Rename either Input or modify the HDCP behavior (Input
1 only) by clicking on the Edit icon ( ) to open the editing
window. Click on “Save” to confirm and activate any changes
made to a name. Changes made to the HDCP behavior are
applied immediately. Available HDCP settings are:
