22
8) Remote Storage (NAS) CIFS:
This section provides a way to
configure access to a NAS (Network Attached Storage) device
using the CIFS protocol.
■ Enable:
Enable or disable access to the defined CIFS based
network storage server.
■ Remote IP:
Enter the IP address of the target CIFS based NAS
device. After entering the information, press the “Save” button.
■ Folder:
Enter a valid share name on the target server. The
share name cannot contain spaces or special characters.
This is where the recording folder structure and video files will
be created. After entering the information, press the “Save”
button.
Note: The target folder on the CIFS server must, at a minimum,
provide read, write and delete permissions for the designated
user.
9) Schedule Record Timer:
Enable or disable the scheduled time
recording function. Each hour of each day is divided into two half-
hour blocks. Currently selected recording times are indicated by
white blocks. Orange blocks indicate that no recording is currently
scheduled. Blocks may be activated or deactivated by clicking
on them. To easily select multiple blocks, you may click and drag
across the preferred range. After setting the preferred recording
blocks, press the “Save” button. To undo changes and return to
the previous schedule configuration, press the “Revert” button.
