23
6.5.7 Time Setting Tab
The Time Settings tab provides a way to set the system’s time, date,
and time zone. The system time can be set manually, or automatically
using a defined SNTP server. If your country uses DST (Daylight Saving
Time) you can enable or disable it here and configure the start and
end times/dates so that your scheduled events will always occur at
the correct times throughout the year.
1) SNTP Configuration
■ GMT:
Select the preferred time zone from the options in the
dropdown.
■ NTP Server:
Enter the address of the network time server to use
for automatic time and date configuration. Click the “Save”
button to set and store the address in the unit. Click the “Sync”
button to force synchronization of the unit’s time and date with
the defined server.
Note: Time synchronization occurs automatically when the unit
is first powered on if an NTP server has already been defined.
Synchronization requires a live connection to the internet.
■ Server Time:
Shows the unit’s current time and date.
