24
2) Time Configuration
■ Date & Time:
The unit’s time and date can be manually
configured here if an internet connection, or NTP server is not
available. Click on the calendar icon ( ) to open the time and
date configuration screen and select the preferred values.
After entering a new time and date, click the “Save” button to
store it in the unit and start the clock running.
3) Daylight Saving Time Configuration:
Enable or disable the use of
DST adjustments for the unit’s time.
Note: Enabling Daylight Saving Time while outside the configured
DST range will result in no change to the current time.
■ Start Time:
Set the month, week, day and time for the start of
DST in the current time zone.
■ End Time:
Set the month, week, day and time for the end of
DST in the current time zone.
■ Adjust Time:
Set the amount of time to add when DST is active.
6.5.8 User Config Tab
The WebGUI and Telnet username/password are set on this page.
Two management levels are available: “Administrator” and “General
User”. The administrator username (“admin”) cannot be changed.
The “Administrator” user has access to all tabs and can change all
settings. The “General User” only has access to the “Live” tab to allow
easy remote video stream viewing.
