1. Introduction
This is the Receiver (Rx) unit of CAT6 to HDMI Solution that can receive the
digital signal through CAT-6 cables. This is compatible to HDMI v1.3
specifications, a cutting-age technology which defines the support to
transfer Deep Color (12 bits/color) video and new lossless compressed
(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio,
with a bandwidth up to 225MHz. The installation of CAT6 to HDMI is easy
and quick, simply place receiver side next to your CAT6 transmitter unit,
then place the CAT6 to HDMI receiver side to your display and get all
necessary cables connected and enjoy.
2. Main Features
●
Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards.
●
Supports digital video formats in Deep Color Mode at up to 36 bits
(12bits/color) and new lossless compressed (Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio) Digital audio.
●
Supports CAT-6 cables of variable types.
●
Supports equalize and recover incoming TMDS data before re-transmitting
them with optimal quality regardless of the incoming signal quality.
●
Supports high definition resolution, the cable distance test with 1080p/8bits
resolution the Input/Output source can run up to 45/15 meters. If
1080p/12bits resolution the Input/Output source can run up to 15/15
meters.
●
Without power supply. (Need to connect with our HDMI series product,
otherwise this feature will not guarantee.)
●
Support CEC bypass.
●
Support xvYCC.
3. Package Contents
●
CAT6 to HDMI Receiver.
●
Operation Manual.
4. Operation Controls and Functions
4.1.
Front Panel
1 Video input: Connect the video input to the video output of the
transmitter unit using CAT-6 cable.
2 DDC input: Connect the DDC input to the DDC output of the transmitter
unit using CAT-6 cable.
1
1
2
DDC
CAT6 INPUT
VIDEO
