CYP CH-2527RXPL, Operation Manual

1

1. INTRODUCTION

Transmitter
This Transmitter is an HDMI/VGA switch with audio embedding and 

HDBaseT output. The wall plate is designed for use with UK two-

gang sized enclosures. This Transmitter can send high definition 

uncompressed audio/video over a single cable up to a distance of 70 

meters at 1080p@60Hz.
The HDMI input supports resolutions up to 4K@60Hz (4:4:4, 8-bit). The 

VGA input supports resolutions up to WUXGA (RB) and with the use of 

the associated 3.5mm audio input, stereo audio may be embedded 

as well. To provide maximum compatibility with a wide range of 

display types, all sources will be automatically scaled to match the 

preferred resolution and timing of the connected display (as reported 

by the display's EDID). Despite HDBaseT’s 10.2Gbps bandwidth 

limitation, even 4K UHD HDMI video sources, up to and including 

4K@60Hz (4:4:4, 8-bit), can be supported by converting the signal to 

4K@30Hz when necessary.

This unit also supports automatic input selection between the HDMI 

and VGA inputs, with hot plug detection, enabling hands-free 

operation. Additionally, the unit may be powered locally or via 48V 

PoH (Power over HDBaseT) from a compatible HDBaseT Receiver, 

which allows for greater flexibility in installations.

Receiver

This receiver is a great solution for extending uncompressed HD 

audio and video as well as Ethernet and control via a single run of 

Cat.5e/6/7 cable over distances of up to 70 meters. Multiple data and 

control interfaces are provided, including IR and RS-232  connections. 

This Receiver complies with the advanced HDCP 2.2 and HDMI 2.0 

standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x 

standards. This Receiver (PSE) can provide 48V PoH (Power over 

HDBaseT) to compatible Transmitters allowing for greater flexibility 

within different installation scenarios.