15
COMMAND
Description and Parameters
set out A osd hposition N1
Set the horizontal position of the OSD.
N1
= 0~60
[H position]
get out A osd hposition
Show the current horizontal position of the OSD.
set out A osd transparency N1
Set the transparency level of the OSD.
N1
= 0~50
[Transparency]
get out A osd transparency
Show the current transparency level of the OSD.
set in 1 hdcp mode N1
Set the HDCP behavior of the HDMI input.
Available values for
N1
:
0
[Disable
HDCP]
1
[Follow
source]
2
[Follow
display]
get in 1 hdcp mode
Show the current HDCP behavior used by the HDMI input.
get out A hdcp status
Show the current HDCP status of the HDBaseT output.
set uart 1 baudrate N1
Set the baud rate to accept from a connected receiver’s RS-232 port.
Available values for
N1
:
0
[4800
baud]
1
[9600
baud]
2
[19200
baud]
3
[38400
baud]
4
[57600
baud]
5
[115200
baud]
Summary of Contents for CH-2538TXM-TB
