31
COMMAND
Description and Parameters
set out A name N1
Set the name of the HDMI output.
N1
= {Name}
[Output A name]
get out A name
Show the name of the HDMI output.
set out A route N1
Route the specified input to the HDMI output.
Available values for
N1
:
1
[HDMI
input]
2
[HDBaseT
input]
get out A route
Show the current input routed to the HDMI output.
set out A mask N1
Enable or disable the a/v mask setting on the HDMI output.
Available values for
N1
:
ON
[Mask
setting
disabled]
OFF
[Mask
setting
enabled]
get out A mask
Display the current a/v mask setting for the HDMI output.
get out A deep color
Show the bit depth currently used by the HDMI output.
get out A color space
Show the color space format currently used by the HDMI output.
get out A sync status
Show the current sync state of the HDMI output.
